IDS-CLAS X-10 (In development)
The IDS-CLAS X-10 represents IDS’s next-generation automation platform for high- and ultra-high volume laboratories.
Currently in development, the system is engineered to deliver stable, continuous sample transport across complex analyzer networks while maintaining structured sample management at scale.
Built on a continuous-flow transport architecture and supported by high-capacity automated storage and intelligent sorting modules, the platform is designed to sustain over 4,000+ tubes per hour in large-scale laboratory environments.
*Contact our sales representative to discuss preliminary specifications of the IDS-CLAS X-10 Series and explore how it could fit into your future workflow.
Development Notice
- The IDS-CLAS X-10 is currently in development and is not yet commercially available.
- Performance data are based on engineering targets and controlled laboratory testing and have not been fully validated. Actual performance may vary.
- This material is provided for informational purpose only.
- Final specifications and features are subject to change pending completion of development and any applicable regulatory review.
1. Double-deck Architecture
Tracks operating on separate levels divide routine and re-run sample routing, helping reduce congestion during peak testing periods.
2. Individual Sample Traceability
Real-time tracking of each sample across the entire automation workflow.
3. Continuous Flow
Stable sample movement across extended automation lines with intelligent merging and sorting lanes.
4. Compact High-Capacity Storage
Automated storage manages up to 10,000 samples for organized archiving and fast retrieval with a footprint of 2.37 m².
Ascending Sample Carrier Elevator
Transports sample carriers from lower-tier to the upper-tier .
Bulk Loader
Designed to handle high volumes of incoming samples, the bulk loader accommodates multiple samples of different tube sizes to be loaded/poured through the top opening as needed.
- Loading capacity up to 800 tubes
- Throughput up to 4000 tubes/hour
- The track supports redundant modules for increased sample volume.
Inlet
Links information of samples arriving from the Bulk Loader & Inlet via RFID tag on the sample carrier. Manages multiple tube sizes.
Features
- 8 x IDS 50-tube racks
- Loading capacity: 400 samples
- Transfers sample from rack to track system via individual sample carriers
- The track supports redundant modules for increased sample volume.
High-Speed Merging Lane
Merges incoming samples from Bulk Loader,Inlet and Re-run (from bottom track).
Equipped with ascending elevator mechanism to return rerun samples back to the upper main lane.
High-Speed Sorting Lane
Samples are sorted into multiple lanes based on the sample information received.
Sorts and routes samples based on priority, discipline, centrifugation or/and direct to analyzer(s) or storage.
Analyzer Connection(s)
IDS-CLAS X-10 support analyzer connections on both sides of the track system, significantly reducing sample travel time to the analyzers. The track supports redundant modules.
Rack or Tube-builder Connections
IDS can develop appropriate automated transfer arms designed to unload samples from sample tube carriers and place them into your laboratory analyzer racks.
Point-in-Space (Direct Track Sampling) Connections
For analyzers that are capable of direct-track sampling from primary tubes or aliquots while they remain on IDS sample transportation track.
IDS is able to manufacture direct track sampling connections that fits and facilitates efficient sample transfer depending on your laboratory analyzers type/make.
- The track supports redundant modules for increased sample volume
Outlet Module
Removes samples from Automation Line and loads them into outlet rack for further sorting or archiving. Automated sample retrieval from outlet for additional testing or re-runs.
The rack sorting configuration can be categorized to allow laboratories organize samples based on specific their needs.
- 8 x IDS 50-tube racks
- Loading capacity: 400 samples
- Throughput up to 1000 tubes/hour
- Track supports redundant modules
Higher Throughput Model is Available
- Additional mechanical arm can be added to expedite unloading throughput compared to a single arm outlet.
- Throughput: Up to 2000 tubes/hr
10K Sample Vault
High capacity and high-density storage module that stores up to 10080 (10K) sample tubes.
Automated sample retrieval for additional testing or re-runs. Streamlining sample traceability and minimizing manual handling.
- Track supports redundant modules
- Available in ambient or refrigerated models
- Temperature settings: 2 to 10°C
- Throughput : 1200 samples/hour
- Optional automated sample disposal available
Descending Elevator
Archived or re-run samples from storage together with other empty sample carriers are transported to the lower-tier and sent to the respective destination.
Carrier Elevator
Installed at the beginning of the X-10 line, the empty sample carrier elevator continuously supplies empty carriers to the system entry point.
This prevents carrier shortages and ensures uninterrupted operation of the Bulk Loader and Inlet units throughout extended, high-volume runs.
Bulk Loader
Multiple samples of different tube sizes can be loaded/poured through the top opening as needed.
Continuous loading capacity with up to 800 tubes. Throughput: 4000 tubes/hour
Sorts the following tube sizes :
- 13 x 75 mm
- 13 x 100 mm
- 16 x 75 mm
- 16 x 100 mm
Inlet
Links information of samples arriving from the Bulk Loader & Inlet via RFID tag on the sample carrier
- Samples are picked up from IDS 50-tube racks and placed into individual sample carriers on the transport line.
- Loading capacity: 400 samples (8 x IDS 50-tube racks)
- 1 of the 8 racks can be configured for Error or STAT Samples
Merging Lane
Consolidates incoming samples from Bulk Loader, inlet and re-run.
This module features an ascending elevator mechanism that returns rerun samples from the lower level to the upper main lane within the two-level transport system.
Sorting Lane
Samples are sorted into one of three lanes based on the sample information via RFID Tag.
Sorts and routes samples based on priority, discipline, centrifugation or/and direct to analyzer.
Rack Builder Connection
Direct Sampling Connection
Analyzer Connections
IDS is capable of manufacturing custom analyzer connections that fits and facilitates efficient sample transfer depending on your laboratory analyzers type/make.
- Rack or Tube-builder Connections
- Point-in-Space (Direct Track Sampling) Connections
Outlet
10K Vault
Stores up to 10080 sample tubes, the samples are unloaded from carriers, 12 samples at a time and systematically placed into storage racks.
Samples can be automatically retrieved for re-runs and add-ons
Return Elevator
The return elevator provides efficient, closed-loop routing for re-run samples and empty carriers by transferring them to the lower transport tier. Re-run samples are transferred to the lower level before returning to the main track via the Merging Module, while empty carriers continue back to the start of the track for reuse. This vertical design prevents track congestion and maintains high throughput, ensuring the X-10 workflow remains uninterrupted.
The images above are for illustrative purpose only. Actual product specifications may differ.
The TLA System includes but also is not limited to the following modules seen, which are all connected via IDS connection track.
Open Automation
Solution
IDS track-based automation systems are designed for open connectivity and have been successfully integrated with over 100 analyzers across 40+ leading IVD manufacturers.
Analyzer Connection Types :
Rack-based transfer
Tube-based transfer
Outboard Sampling
Custom connections
Multi-disciplinary
Our systems support multi-disciplinary testing environments as seen below.
Chemistry
Immunoassay
Coagulation
Urine Analysis
Hematology
Molecular
Key Features
Open Connectivity
Integrates across multiple IVD disciplines and analyzers.
Flexible Design
Adapt to any laboratory layout or operational flow.
Scalable Modules
Grow your automation system as your lab’s needs evolve.
Future-Proof System
Designed with upgrade paths and continuous innovation in mind.
